NEC VT57, VT58 Bottom, Attaching the supplied carrying handle, Introduction, Lamp Cover → page

1. Introduction

Bottom

Rear Foot (Left / Right) (→ page 22)

Adjustable Tilt Foot (→ page 22)

Adjustable Tilt Foot Button (→ page 22)

Lamp Cover (→ page 51)

Attaching the supplied carrying handle

You can carry the projector by attaching the supplied carrying handle securely to the projector.

To attach the supplied carrying handle, use a Phillips-head screwdriver and the supplied two screws.

Place a soft cloth on the working surface before turning the projector over to prevent scratching the top cover. Make sure that the carrying handle is attached with correct orientation as shown below.

Screw

Phillips-head screwdriver

(not supplied)

Carrying handle

CAUTION

When carrying the projector by the carrying handle, make sure the two screws that attach the carrying handle to the projector cabinet are tight.

4