NEC VT57, VT58, VT480 manual Turning off the Projector, To turn off the projector

3. Projecting an Image (Basic Operation)

Turning off the Projector

To turn off the projector:

1.First, press the POWER (ON/STAND BY) button on the projector cabinet or the POWER OFF button on the remote control. The [Power Off / Are you sure?] message will appear.

MENU

SELECT

LAMP	ENTER
STATUS
POWER

	IT
X
E

OFFON

POWER

MAGNIFY PIC-MUTE PAGE

UP

DOWN

MENU

2.Secondly, press the ENTER button or press the POWER (ON/STAND BY) or the POWER OFF button again.

The power indicator will glow orange. After the projector turns off, the cooling fans keep operating for 30 seconds (Cool-down time).

Immediately after turning on the projector and displaying an image, you cannot turn off the projector for 60 seconds.

3.Finally, turn off the Main Power switch. The power indicator will go out.

TIP: The main power of the projector can be turned off by pressing the main power switch or by unplugging the power cable even during the cool down period after the projector is turned off.

NOTE: Do not turn off the main power within 10 seconds of making adjustment or setting changes and closing the menu.

Doing so can cause loss of adjustments and settings.

ON/STAND BY SOURCE AUTO ADJ. ENTER EXIT

Power On	Fan running	Standby
LAMP	LAMP	LAMP
STATUS	STATUS	STATUS
POWER	POWER	POWER
Steady green light	Blinking	Steady orange
	orange light	light

CAUTION:

Parts of the projector will become heated during operation. Use caution when picking up the projector immediately after it has been operating.

CAUTION:

•The projector cannot be turned off for 60 seconds after the lamp is turned on and while the POWER indicator is blinking green. Doing so could cause premature lamp failure.

•Do not turn off the AC power by pressing the main power switch or by unplugging the power cable when the projector is powered on. Doing so can cause damage to the projector.

27