NEC VT58 Cleaning or Replacing the Filters, To clean the air-filter, To replace the filter sponge

6. Maintenance

This section describes the simple maintenance procedures you should follow to clean the filters and replace the lamp.

Cleaning or Replacing the Filters

The air-filter sponge keeps dust and dirt from getting inside the projector and should be cleaned after every 100 hours of operation (more often in dusty conditions). If the filter is dirty or clogged, your projector may overheat.

CAUTION

•Turn off the projector, turn off the main power switch and unplug the projector before replacing the filters.

•Only clean the outside of the filter cover with a vacuum cleaner.

•Do not attempt to operate the projector without the filter cover.

To clean the air-filter:

Vacuum the filter-through the filter cover.

VT58/VT57/VT48

VT580/VT480

To replace the filter (sponge):

1. Remove the filter cover by pushing down on the catch of the cover until you feel it detach.

NOTE: The VT580 and VT480 have two filters; the VT58, VT57 and VT48 have one filter only.

Catch

2. Gently peel off the filter (sponge) and replace it with the new one.

49