7
8
12
13
| POWER | |
DEGAUSS | OFF | ON |
VIDEO 1 VIDEO 2 | RGB 1 | RGB 2 |
POSITION/CONTROL PROCEED
EXIT
SCAN
WIDTH HEIGHT SIDE PIN NORMAL
NORMAL
BRIGHT CONTRAST MUTE VOLUME
MULTIMEDIA MONITOR
79645721
9
10
11
14
16
15
9
Raster Control7 WIDTH (+ /Adjusts the curvature of the edges of the left and right side of the display image either inward or outward. The image should be adjusted to attain a straight line on the left and right sides.
10 SCAN SELECTEach time this key is pressed, the picture size switches from OVER SCAN for large size to UNDER SCAN for small size and vice versa. Normally select OVER SCAN for video display and UNDER SCAN for RGB display.
11 NORMALThis key resets the raster adjustment settings of user changeable memory and recalls the factory preset data.
Visual Control12 BRIGHT (▲/▼)Adjusts the overall image and screen brightness.Press and hold s for a brighter picture.Press and hold t for a darker picture.13 CONTRAST (▲/▼)Adjusts the image brightness in relation to the background. Press and hold ▲ for higher contrast.
Press and hold ▼ for lower contrast.NOTE: The VISUAL CONTROL storing operation is effective only for one input
(VIDEO1, VIDEO 2, RGB 1 or RGB 2).
14 NORMALThis key resets the visual control settings and recalls the factory preset data.
NOTE: The brightness and contrast adjustment level are factory preset at the
optimum position.
15 MUTEPress to cancel sound ; press again to restore sound.NOTE: The other ways to restore sound are to press POWER OFF, then ON or to
press VOLUME keys on the remote control unit.
16 VOLUME (▲/▼)Adjusts the volume.Press and hold ▲ to increase sound.Press and hold ▼ to decrease sound.10