RGB Controls GroupThe RGB Controls allow you to adjust the white balance for RGB input.

Pressing the PROCEED key proceeds to the RGB gain and bias adjustment. This adjustment allows you to adjust the white balance.

R, B-GAIN : Pressing + or - increases or decreases the gain level for each color.

R, G, B-BIAS : Pressing + or - increases or decreases the bias level for each color.

29

OSM Location/OSM Turn Off Time Control

You can choose where you would like OSM image to appear on your screen. Selecting OSM location allows you to manually adjust the OSM menu left, right, up, or down. The OSM menu will stay on as long as it is in use. In the OSM Turn Off Time submenu, you can select how long the monitor waits after the last touch of a key to shut off the OSM menu. The preset choices are 5, 10, 30, and 120 seconds. Note that 30 seconds is the factory preset.

OSM H-POSI

: Pressing + or - moves the OSM menu right or left.

OSM V-POSI: Pressing + or - moves menu up or down.

OSM TURN OFF TIME : Pressing + or - selects the preset time in increasing or decreasing order.

Source Information

Source Information provides you information about the current resolution display and technical data including the horizontal and vertical frequency.

NOTE: These adjustments are for RGB mode only.H-FREQ : indicates the horizontal frequency of the current input signal.V-FREQ : indicates the vertical frequency of the current input signal.H-POL : indicates the polarity of the horizontal sync. signal.V-POL : indicates the polarity of the vertical sync. signal.NEG : indicates the polarity is negative.POS : indicates the polarity is positive.

30