Press to reset all the stored adjustment visual data and recall the factory preset data. When a specific control is selected, this key resets the selected visual adjustments.
25
j. MUTEPress to turn off the sound for a short period of time; press again to restore
the sound.
k. VOLUMEPress ▲ to increase the sound: press ▼ to decrease the sound.
NOTE: When pressing a key that does not correspond to the function currently in
use, the following message will be displayed on the monitor.
Press the PROCEED key on the remote control or front bezel. To turn off OSM
Press the EXIT key on the remote control or front bezel.
VIDEO 1 VIDEO 2 RGB 1 RGB 2
POSITION/CONTROL PROCEED
PROCEED |
| POWER POWER |
EXIT |
| VOLUME SOURCE SELECT /STANDBY |
NO) R | PROCEED EXIT | |
EXIT | DIO |
|
|
|
The visual controls allow you to adjust the picture controls such as brightness, contrast, color, tint, and sharpness.
BRIGHTNESS | : Pressing + or - | increases or decreases the image brightness level. |
CONTRAST | : Pressing + or - | increases or decreases the image contrast level. |
SHARPNESS | : Pressing + or - increases or decreases the image sharpness level. | |
COLOR | : Pressing + or - increases or decreases the image color saturation level | |
TINT | : Pressing + or - increases or decreases the red and green values. |
NOTE: The color, tint and sharpness controls are not available for RGB input, and the tint is not available for PAL input.
NOTE: Pressing the visual NORMAL key resets all the visual controls to the factory settings when only the visual controls group icon is highlighted.
26