| POWER |
| |
DEGAUSS | OFF | ON | 1 |
2 |
|
| |
VIDEO 1 VIDEO 2 | RGB 1 | RGB 2 | 3 |
|
|
| |
POSITION/CONTROL | PROCEED | 5 | |
|
|
| |
4 |
| EXIT | 6 |
|
| ||
|
| SCAN |
|
WIDTH HEIGHT | SIDE PIN NORMAL |
|
NORMAL
BRIGHT CONTRAST MUTE VOLUME
MULTIMEDIA MONITOR
79645721
7
NOTE: When not in use the remote control unit is conveniently stowed in the
holder on the rear panel.
1 POWER ON/OFFPress POWER ON to turn the monitor on when the POWER/STANDBY indicator is lit red.
Press POWER OFF to turn the monitor off and the monitor will go into the standby condition.
2 DEGAUSSPress to demagnetize the picture tube in the manual operation. See also page 21.
3 Input SelectVIDEO 1 ........ Press to select an NTSC, PAL, SECAM or
compatible video source from a VCR, laser disc player, document camera, or an
VIDEO 2 ........ Press to select an NTSC, PAL, SECAM or
compatible video source from a VCR, laser disc player, document camera, or an
RGB 1 ............ Press to select an RGB video source from a computer
connected to the RGB 1 IN terminal.
RGB 2 ............ Press to select an RGB video source from a computer, NEC
scan converter or document camera connected to the RGB 2 IN terminal.
OSM Control4 POSITION/CONTROLPOSITION (▲▼ß ©) .. Adjusts the vertical position of the image up and down, and the horizontal position of the image from left to right.
CONTROL ( + / – ) .... Moves the bar in the + or - direction to increase or
decrease the adjustment in an OSM menu. CONTROL (▲/▼) ..... Select one of the controls in an OSM menu. Press s
to select a higher item in the menu; press t to select a lower item in the menu.
5 PROCEEDPress to access OSM. When an adjustment item is selected, a press of this button returns to its icon selection screen.
6 EXITPress to exit the OSM mode.
NOTE: The direct keys such as BRIGHT, CONTRAST, WIDTH, HEIGHT, SIDE
PIN can access each control while in the OSM mode.
8