11
The remote control is powered by two 1.5V AA batteries.
1.Turn the remote control unit upside down. Press down on the battery compartment grip and slide the compartment in the direction of the arrow.
2.Install the two new batteries, making sure that their polarity matches the (+)
3. Close the battery compartment cover.
•Do not drop or mishandle the remote control unit.
•Do not get the remote control unit wet. If the remote gets wet, wipe it dry immediately.
•Avoid heat and humidity.
•When not using the remote control unit for a long period, remove the batteries.
•Do not use new and old batteries together, or use different types of batteries together.
•Do not take apart the batteries, heat them, or throw them into a fire.
| S |
|
|
|
|
| POWER POWER |
|
|
| VOLUME SOURCE SELECT /STANDBY |
RGB2 | VIDEO2 | L (MONO) R | PROCEED EXIT |
|
| AUDIO |
•The infrared signal operates by
•The monitor will not function if there are objects between the remote control and the sensor or if strong light falls on the sensor. Weak batteries will also prevent the remote control from properly operating the monitor.
30˚ 30˚
| POWER | |
DEGAUSS | OFF | ON |
VIDEO 1 VIDEO 2 | RGB 1 | RGB 2 |
POSITION/CONTROL | PROCEED | |
|
| EXIT |
|
| SCAN |
WIDTH HEIGHT | SIDE PIN NORMAL |
NORMAL
BRIGHT CONTRAST MUTE VOLUME
12