Netac Tech T600 manual Point-to-Point P2P Mode, Repeater Mode Parent/Child MAC Addresses

Netac AirTrack T600 Mini Wireless Router

Access Point: Child = Repeater-2

Repeater-2: Parent = Access Point; Child = Repeater-3

Repeater-3: Parent = Repeater-2; No Child

Figure 3.3 Repeater Mode (Parent/Child MAC Addresses)

3.3 Point-to-Point (P2P) Mode

Two T600 devices, each in Point-to-Point (P2P) Mode, establish a wireless connection between two wired networks, as shown in Figure 3.4. The two T600 devices operating in P2P Mode do not allow client connecting to it directly.

Figure 3.4 P2P Mode (Wireless Bridge)

To configure T600 devices to establish a P2P wireless bridge, ensure the following:

1.Enter the MAC address of T600 P2P-2 device in the P2P MAC address field in T600 P2P-1 device (on the P2P Mode Setup page, Figure 5.8).

2.Enter the MAC address of T600 P2P-1 device in the P2P MAC address field in T600 P2P-2 device (on the P2P Mode Setup page, Figure 5.8).

Section 5.3 "P2P Mode Setup Page" describes the configuration details for this mode.

7