Access to the device that provides the IP address | Netac Tech T600

Netac AirTrack T600 Mini Wireless Router

Figure 8.3 Client Mode - LAN Page

CAUTION: Selecting the Automatic IP option is not advised unless the user has direct access to the device that provides the IP address. Be sure to know how to distinguish the IP address of T600 from that of a connected device before selecting this option. This is important regardless of T600 operating mode.

				Table 8.2 Client Mode - LAN Page Options

	Field			Description

				Allows the user to assign a friendly device name to access T600. For example in
				Figure 8.3, both http://AirTrackT600N1 and http://192.168.1.1 can be used to open
	Device Name			the configuration webpages of the device.
				NOTE: To configure T600, the user must access T600 from a PC that is on the
				same subnet.

				Configure the device to use an automatic (DHCP) IP address.
	Automatic IP			NOTE: Selecting the Automatic IP option is not advised unless the user has direct
				access to the device that provides the IP address.

	Fixed IP			Default option. Values of the IP Address, Subnet Mask, and Gateway fields must
	Fixed IP			be specified.
				be specified.

	IP Address			Set the IP address of T600.

37

Image 42

Netac Tech T600 manual Access to the device that provides the IP address

Contents

Netac AirTrack T600 Mini Wireless Router Remarks Radio Frequency Interference Remarks Table of Contents Appendix B Contact Netac Appendix C Glossary Welcome ChecklistIntroduction Product function Appearance Appearances Upside Default Factory Settings Quick Start Operating Mode Overview AP Router Mode Repeater Mode Point-to-Point P2P Mode Repeater Mode Parent/Child MAC Addresses Point-to-Multipoint PMP Mode Client Mode Client in Infrastructure Mode Wireless Security Support WEP WPA-PSK Mode Selection AP Router Mode Setup Field Description AP Router Mode Security Configuration WEP Configuration AP Router Mode Advanced Settings AP Router Mode WPA Configuration AP Router Mode Access Filter MAC Filter List Setup Connect Repeater Repeater Mode Setup AP Router Mode Access Filter Repeater Mode Setup Repeater Mode Setup Options Repeater Mode Security Configuration Repeater Mode Advanced Settings Repeater Mode Access Filter MAC Filter List Setup P2P Mode Setup P2P Mode Setup 11 P2P Mode Setup Options 1 P2P Mode Security Configuration 2 P2P Mode Advanced Settings PMP Mode Setup 10 P2P Mode Advanced Settings PMP Mode Security Configuration 11 PMP Mode Setup 14 PMP Mode Setup Options PMP Mode Advanced Settings 12 PMP Mode Advanced Settings 16 PMP Mode Advanced Settings Client Mode Setup Station Mode Select 802.11b or 802.11g mode Client Mode Site Survey 14 Client Mode Site Survey 18 Client Mode Site Survey Client Mode Security Configuration 15 and .19 detail the WEP configuration page for Client Mode 16 and .20 detail the WPA configuration for Client Mode AP Router Mode Status Status Repeater Mode Status P2P Mode Status Client Mode Status Admin AP Router Mode Admin Reconfirm Password fields and click Apply LAN Same subnet Netac AirTrack T600 Mini Wireless Router Access to the device that provides the IP address Same subnet Other WAN Forward DMZ Specifications LED Appendix a FAQ My question is not included in FAQ, what shall I do? Appendix B Contact Netac Appendix C Glossary 802.11b CCK LAN Wlan