Netac Tech T600 manual Client Mode Security Configuration

Netac AirTrack T600 Mini Wireless Router

Join

Close

Select a wireless network, and then click the Join button to connect the client bridge with the selected AP/node or Ad-Hoc network.

Close the Site Survey page.

5.5.2 Client Mode - Security Configuration

To enable security, select the desired security mode (WEP or WPA) in the Client Mode setup page (Figure 5.13) and click the Setup button to enter the configure page.

5.5.2.1 WEP Configuration Page

Figure 5.15 and Table 5.19 detail the WEP configuration page for Client Mode.

	Figure 5.15 Client Mode - WEP Configuration Page
	Table 5.19 Client Mode - WEP Configuration
Field	Description
Authentication Type	Select Open or Shared Key.
WEP Length	Select WEP key length: 64 bits or 128 bits.
Mode	Select WEP key format: Hexadecimal or ASCII.
Passphrase	Passphrase is used to generate the WEP keys. Click the Generate button to
	generate the keys. Click the Clear button to clear the Passphrase field.
Key 1-4	WEP keys.
Default TX key	Select default WEP key from Key1-4.

27