Netac AirTrack T600 Mini Wireless Router
|
|
|
| Figure 5.11 PMP Mode Setup Page |
|
|
|
|
| Table 5.14 PMP Mode Setup Options |
|
|
|
|
|
|
|
| Field |
|
| Description |
|
|
|
|
|
|
|
| Remote Bridge |
|
| MAC address of the remote bridge to which this bridge is connected. |
|
|
|
|
|
|
|
| Mode |
|
| Select 802.11b, 802.11g or Mixed mode. |
|
|
|
|
|
|
|
| Domain |
|
| Select domain. Different domain use different channel. |
|
|
|
|
|
|
|
| Channel |
|
| Select RF channel. Default: Channel 6. |
|
|
|
|
|
|
|
| Security |
|
| Select Disable (Default) or WEP. Select WEP, and click the Setup button to enter |
|
|
|
| the WEP configuration page (Figure 5.3). |
| |
|
|
|
|
| |
|
|
|
|
|
|
| Advanced Settings |
|
| Click Setup to configure Advanced Settings (Figure 5.12). |
|
|
|
|
|
|
|
NOTE: Under PMP Mode, you must make sure the related configuration (such as Security, Channel, etc.) of Remote Bridge is consistent with T600 in order to communicate with each other.
5.4.1 PMP Mode - Security Configuration
To enable security, select WEP in the PMP Mode setup page (Figure 5.11) and click the Setup button to enter the configuration page.
23
