Netac AirTrack T600 Mini Wireless Router
8 LAN Page
The AP Router Mode's LAN page, shown in Figure 8.1, allows the user to set the IP address of T600.
| Figure 8.1 AP Router Mode - LAN Page |
| Table 8.1 AP Router Mode - LAN Page Options |
|
|
Field | Description |
|
|
| Set the IP address of T600. |
IP Address | NOTE: To configure T600, the user must access T600 from a PC that is on the |
| same subnet. |
|
|
Subnet Mask | Allow the user to specify a subnet mask. Default: 255.255.255.0. |
|
|
DHCP Service | Disable/Enable DHCP server. |
|
|
DHCP Start IP | Set the starting IP address of DHCP server's IP address. Default: 192.168.1.100. |
|
|
DHCP End IP | Set the ending IP address of DHCP server's IP address. Default: 192.168.1.150. |
|
|
DHCP IP Release | Set the effective time of the IP address assigned by DHCP server. |
|
|
Figure 8.2 shows the LAN page for Repeater Mode.
35
