System Administration > Configuration

The Configuration window contains commands for settings that are required to input key details to setup the camera for operation. Click Configuration in the top menu bar and the Configuration window will appear as below:

System

Click the System item in the left column to setup the basic configuration of your camera.

System Setting

In this field, you can configure the basic information of your camera.

Camera Name: This field is used to enter a descriptive name for the device. The default setting for the Camera Name is CS-xxxxxx, where xxxxxx is the last six digit of the MAC Address. The maximum length is 32 (printable ASCII).

Location: This field is used to enter a descriptive name for the location used by the camera (optional).

Admin: This field is used to enter the administrator name along with the password to access the System Administration settings. Be sure to enter the password twice to confirm the details once in the Admin Password field and again in the Confirm Password field.

NS370 / NS370W User Guide

19

YML814 Rev1

 

Page 19
Image 19
NetComm NS370W manual System Administration Configuration, System Setting