Hardware Installation
Attaching the Camera to the Stand
The Internet Camera comes with a camera stand (optional) with a swivel ball screw head that can be attached to the Internet Camera’s bottom screw hole. Attach the camera stand to the Internet Camera and station it for your application. There are three holes located in the base of the camera stand allowing the Internet Camera to be mounted on the ceiling or any wall securely.
Connecting the Ethernet cable
Connect an Ethernet cable to the network cable connector located on the Internet Camera’s rear panel, and then attach it to the network.
Attaching the Power Supply
Attach the external power supply to the DC power input connector located on Internet Camera’s rear panel, and then connect it to your local power supply.
TIP: | You can confirm power source is supplied from the LED indicators |
| label Power on the Internet Camera is illuminated. |
10 | NS370 / NS370W User Guide |
| YML814 Rev1 |
