NETCOMM LIBERTY™ SERIES - 3G WiFi Router
7.3 Security
Your Router can be secured with incoming or outgoing IP Filtering. This allows you to control whether data can enter or leave via the router.
7.3.1 IP Filtering
The IP Filtering screen sets filter rules that limit incoming and outgoing IP traffic. Multiple filter rules can be set with at least one limiting condition. All conditions must be fulfilled when individual IP packets pass filter.
Outgoing IP Filter
The default setting for Outgoing traffic is ACCEPTED. Under this condition, all outgoing IP packets that match the filter rules will be
BLOCKED.
To add a filtering rule, click the Add button. The following screen will display.
OPTION | DESCRIPTION |
|
|
Filter Name | The Filter rule label. |
|
|
Protocol | TCP, TCP/UDP, UDP or ICMP traffic. |
|
|
Source IP address | Enter source IP address. |
|
|
Source Subnet Mask | Enter source Subnet mask. |
|
|
Source Port (port or port:port) | Enter source port number or port range. |
|
|
Destination IP adress | Enter destination IP address. |
|
|
Destination Subnet Mask | Enter destination subnet mask. |
|
|
Destination port (port or port:port) | Enter destination port number or range. |
|
|
Click Save/Apply to save and activate the filter.
3G WiFi Router User Guide | |
www.netcomm.com.au | 35 |
