NetComm YML-O-3G19W manual MAC Filter, Feature Description

NETCOMM LIBERTY™ SERIES - 3G WiFi Router

5.4 MAC Filter

This screen appears when Media Access Control (MAC) Filter is selected. This option allows access to be restricted based upon the unique 48-bit MAC address.

To add a MAC Address filter, click the Add button as shown below.

To delete a filter, select it from the table below and click the Remove button.

FEATURE	DESCRIPTION
MAC Restrict Mode	Disabled — Disables MAC filtering
	Allow — Permits access for the specified MAC addresses.
	NOTE: Add a wireless device’s MAC address before clicking the Allow radio button
	or else you will need to connect to the Router’s web user interface using the supplied
	yellow Ethernet cable and add the wireless device’s MAC address.
	Deny — Rejects access for the specified MAC addresses.
MAC Address	Lists the MAC addresses subject to the MAC Restrict Mode. The Add button
	prompts an entry field that requires you type in a MAC address in a two character,
	6-byte convention: xx:xx:xx:xx:xx:xx where xx are hexadecimal numbers. A
	maximum of 60 MAC addresses can be added.

Enter the MAC address on the screen below and click Save/Apply.

YML-O-3G19W	3G WiFi Router User Guide
www.netcomm.com.au	23