Discover Resources
31
NMS300 Network Management System Application
8. If the credential that you need is not listed in the table, do the following:
a. Click the Add button.
In addition to the default credentials, the screen displays the device credentials that
you have added. For more information, see Add a Device Credential on page 25.
b. Select one or more credentials and click the Add Selection button.
To add all credentials, click the Add All button.
The Select Credentials screen closes and the credentials are added to the Select
Credentials table on the Network subscreen (the figure that is shown in Step 5).
c. On the Network subscreen, select the credential or credentials that you added.
9. Click the Save button.
The screen closes and the new or modified discovery profile displays in the Network
Discovery table.
Execute a Discovery Job
You can execute a one-time discovery job immediately. For information about scheduling a
one-time or recurring discovery job, see the NMS300 Network Management System
Application User Manual.
To execute a discovery job:
1. Log in to the application.
For more information, see Log In to the Application on page 12.