Manage Configurations and Firmware
68
NMS300 Network Management System Application
Import a Firmware File
After you download device firmware (an image) from the NETGEAR website at
support.netgear.com to your computer, you can load the firmware file onto the NMS300
server.
If you want to use an MD5 file for error checking during the import process, first use an MD5
tool to generate an MD5 file that is based on the firmware file that you want to import.
To load a firmware file onto the NMS300 server:
1. Log in to the application.
For more information, see Log In to the Application on page 12.
2. Select CONFIG > IMAGE MANAGEMENT.
3. Click the Load Image button.
4. Specify the following information:
•Select Your File. Click the Select button.
To select the firmware from your computer, follow the directions of your browser.
•Enable MD5 Check. To enable file validation with the Message Digest 5 algorithm,
select this check box and click the Select button.