Manage Configurations and Firmware
60
NMS300 Network Management System Application
Add a Backup Profile and Execute a Backup Job
A backup profile defines the devices that are included in a backup job, and as an option, the
schedule with which the backup job occurs. For information about scheduling a backup job,
see the NMS300 Network Management System Application User Manual.
You must create a backup profile before you can back up the configuration of one or more
devices. After you have executed a backup job, you can use the backup file to restore device
configurations for the devices on your network. For more information, see Restore the
Configuration of a Single Device on page 63.
To a single backup profile, you can add devices, device groups, or both.
To add a backup profile and execute a backup job:
1. Log in to the application.
For more information, see Log In to the Application on page 12.
2. Select CONFIG > BACKUP.
The Backup screen displays the existing backup profiles.
3. To add columns to or remove them from the Backup table, right-click the table heading
anywhere, and specify the columns by selecting the corresponding check boxes.
You can choose from the following columns: Name, Scheduled, Recurrent Type, Last
Execution Time, Last Execution Status, Next Execution Time, Description, Created By,
and Created Time.