Monitor Your Network
47
NMS300 Network Management System Application
The following figure shows a sample of a screen that displays when you filter by device IP
address:
7. Select the device or SSID.
8. Click the Select button.
The screen closes and the empty Active Client List table displays.
9. Click the Apply button.
The application populates the Active Client List table with the wireless clients of the
selected device or SSID.
10. To add columns to or remove them from the Active Client List table, right-click the table
heading anywhere, and specify the columns by selecting the corresponding check boxes.
You can choose from the following columns: Client MAC Address, Client IP Address,
Location, AP Name, Associated Controller, SSID, BSSID, Protocol, Authentication Mode,
Duration, Channel, RSSI, SNR, Transmit Power, Transmitted, Rate (Mbps), Received
Rate (Mbps), Transmitted Bytes, Received Bytes, Transmitted Packets, Received
Packets, and Status.