Install the NMS300 Application
9
NMS300 Network Management System Application

NETGEAR Wireless Management Systems and Controllers

This release supports the following NETGEAR wireless management systems and wireless
controllers:
•WMS5316
•WC7520
•WC9500
Download, Install, and Run the Application
The application must reside on a server at a static IP address on the local area network.
To download, install, and run the application:
1. Review the supported Windows computer operating systems (see Computer
Requirements on page 6).
2. Visit downloadcenter.netgear.com and download the application zip file that corresponds to
your Windows computer operating system.
3. Make sure that the Windows computer on which you intend to install the application has a
static IP address assigned to it.
The application binds itself to the static IP address of the host computer, which is the
NMS300 server.
4. Unzip the file you downloaded to obtain the executable installer file.
5. Launch the installer wizard by double-clicking the executable file.
6. Follow the installer wizard prompts.
The installer wizard guides you through the default settings and allows you to customize
them.
•If another application is already using port number 8080 on the Windows computer,
modify this default setting to a different port number.
•Other settings can be customized as well.
•If you have multiple network interface cards (NICs) on your Windows computer, select
the appropriate NIC in the NIC selection screen of the wizard.
Once the installer finishes executing, you are prompted to reboot the computer.
7. Reboot your computer.
NETGEAR recommends that you reboot your computer.
After the reboot, for Windows 7 and Windows XP operating systems, the application is
already running as a service.