Manage Configurations and Firmware
64
NMS300 Network Management System Application
CAUTION:
When you restore the configuration of a device, you must provide the
correct configuration file. Make sure that you select both the correct device
type and correct device model for the configuration file that you upload to
the application. If you provide the wrong configuration file, the application
pushes the incorrect configuration file when it executes the configuration
restore job and you can damage the device.
To restore a configuration to a single device:
1. Log in to the application.
For more information, see Log In to the Application on page 12.
2. Select CONFIG > RESTORE.
3. To add columns to or remove them from the Restore table, right-click the table heading
anywhere, and specify the columns by selecting the corresponding check boxes.
You can choose from the following columns: File Name, Device Name, File Type, Create
Time, Device Type, Size (KB), Promoted, Description, Device IP, Device Model, Version,
Vendor, and Created By.
4. To filter the configuration files that are listed, click the Show Filter button.
You can filter the configuration files by criteria such as device type, device model, device
name, and device IP address.
To hide the filter, click the Hide Filter button.
5. Select the configuration file.