Monitor Your Network
45
NMS300 Network Management System Application

View Wireless Management System Information Only

You can display only the wireless management systems that the application manages.
To view wireless management system information:
1. Log in to the application.
For more information, see Log In to the Application on page 12.
2. Select WIRELESS > WMS.
3. To add columns to or remove them from the Devices table, right-click the table heading
anywhere, and specify the columns by selecting the corresponding check boxes.
You can choose from the following columns: Status, Device Name, IP Address,
Hostname, Managed By, MAC Address, Device Model, Vendor, Location, Device Type,
Last Update Time, Hardware Version, Firmware Version, Configuration Version, Serial,
Number, Contact, and Discover Time.
4. To filter the devices that are listed, click the Show Filter button.
You can filter the devices by criteria such as type, name, IP address, location, vendor,
model, and status.
To hide the filter, click the Hide Filter button.
5. To view details about a device, click the device name (or IP address) for the device.
For more information, see View Device Information and Device Details on page 40.
View Wireless Client Information
The application lets you monitor the active wireless clients by wireless controller, standalone
AP, controller-managed AP, or SSID.
You can display various wireless details for each client.
To monitor wireless clients and view details for a single client:
1. Log in to the application.
For more information, see Log In to the Application on page 12.