NETGEAR DG834G manual Chapter, Virtual Private Networking, Troubleshooting, v1.2, October

Static Route Example	7-11
How to Configure Static Routes	7-12
Universal Plug and Play (UPnP)	7-13
Chapter 8
Virtual Private Networking
Overview of VPN Configuration	8-2
Client-to-Gateway VPN Tunnels	8-2
Gateway-to-Gateway VPN Tunnels	8-3
Planning a VPN	8-4
VPN Tunnel Configuration	8-6
How to Set Up a Client-to-Gateway VPN Configuration	8-7
Step 1: Configuring the Client-to-Gateway VPN Tunnel on the DG834G v3	8-7
Step 2: Configuring the NETGEAR ProSafe VPN Client on the Remote PC	8-12
How to Set Up a Gateway-to-Gateway VPN Configuration	8-21
VPN Tunnel Control	8-29
Activating a VPN Tunnel	8-29
Verifying the Status of a VPN Tunnel	8-33
Deactivating a VPN Tunnel	8-35
Deleting a VPN Tunnel	8-37
How to Set Up VPN Tunnels in Special Circumstances	8-38
Using Auto Policy to Configure VPN Tunnels	8-38
Using Manual Policy to Configure VPN Tunnels	8-49
Chapter 9
Troubleshooting
Basic Functioning	9-1
Power LED Not On	9-2
Test LED Never Turns On or Test LED Stays On	9-2
LAN or Internet Port LEDs Not On	9-2
Troubleshooting the Web Configuration Interface	9-3
Troubleshooting the ISP Connection	9-4
ADSL link	9-4
Obtaining a WAN IP Address	9-5
Troubleshooting PPPoE or PPPoA	9-6
Troubleshooting Internet Browsing	9-7
Troubleshooting a TCP/IP Network Using the Ping Utility	9-7
4

v1.2, October 2006