NETGEAR manual Appendix B NETGEAR VPN Configuration, DG834G v3 to FVL328, Configuration Profile

Appendix B

NETGEAR VPN Configuration

DG834G v3 to FVL328

This appendix is a case study on how to configure a secure IPSec VPN tunnel from a NETGEAR DG834G v3 to a FVL328. This case study follows the VPN Consortium interoperability profile guidelines (found at http://www.vpnc.org/InteropProfiles/Interop-01.html).

Configuration Profile

The configuration in this document follows the addressing and configuration mechanics defined by the VPN Consortium. Gather all the necessary information before you begin the configuration process. Verify whether the firmware is up to date, all of the addresses that will be necessary, and all of the parameters that need to be set on both sides. Check that there are no firewall restrictions.

Table B-1.		Profile Summary
VPN Consortium Scenario:			Scenario 1
Type of VPN			LAN-to-LAN or Gateway-to-Gateway (not PC/Client-to-Gateway)
Security Scheme:			IKE with Preshared Secret/Key (not Certificate-based)
IP Addressing:
	NETGEAR-Gateway A		Static IP address
	NETGEAR-Gateway B		Static IP address

NETGEAR VPN Configuration B-1

v1.2, October 2006