NETGEAR DG834G manual Manually Setting Up Your Modem Router

Reference Manual for the ADSL Modem Wireless Router DG834G

Manually Setting Up Your Modem Router

There are four steps to setting up your modem router:

1.Install ADSL filters on the phone lines.

2.Connect the firewall to the ADSL line.

3.Log in to the firewall.

4.Connect to the Internet.

Follow the steps below to connect your firewall to your network. Before you begin, locate the ADSL configuration information from your Internet Service Provider (ISP).

1.Connect the ADSL filter.

Note: If you purchased the DG834G v3 in a country where an ADSL filter is not included, you must acquire one.

a.You need to install an ADSL filter for every telephone that uses the same phone line as your modem router. Select the filter that came with your modem router.

1

Phone

3

2

DSL Phone

Line

1.One-Line Filter: Use with a phone or fax machine.

2.Splitter: Use with a one-line filter to share an outlet with a phone and the modem router.

3.Two-Line Filter with Splitter: Use to share an outlet with a phone and the modem router.

Figure 3-3

3-4 Configuring Your Internet Connection

v1.2, October 2006