NETGEAR DG834G Deactivating a VPN Tunnel, Using the VPN Status Page to Deactivate a VPN Tunnel

Reference Manual for the ADSL Modem Wireless Router DG834G

Deactivating a VPN Tunnel

Sometimes a VPN tunnel must be deactivated for testing purposes. There are two ways to deactivate a VPN tunnel:

•Policy table on VPN Policies page

•VPN Status page

Using the Policy Table on the VPN Policies Page to Deactivate a VPN Tunnel

To use the VPN Policies page to deactivate a VPN tunnel, perform the following steps:

1.Log in to the Modem Router.

2.Open the DG834G v3 management interface and click on VPN Policies to get the VPN Policies screen (Figure 8-36).

Figure 8-36

3.Clear the Enable check box for the VPN tunnel you want to deactivate and click Apply. (To reactivate the tunnel, check the Enable box and click Apply.)

Using the VPN Status Page to Deactivate a VPN Tunnel

To use the VPN Status page to deactivate a VPN tunnel, perform the following steps:

1.Log in to the Modem Router.

Virtual Private Networking 8-35

v1.2, October 2006