NETGEAR DG834GUV5 user manual USB Drive Requirements

DG834GUv5 Wireless Router with Built-in DSL Modem User Manual

USB Drive Requirements

The DG834GUv5 Wireless Router conforms to the USB 1.0 and 1.1 (USB Full Speed) and 2.0 (USB High Speed) standards. The approximate USB bus speeds are shown below.

Actual bus speeds will vary, depending on the CPU speed, memory, speed of the network, and other variables.

The DG834GUv5 should work with all USB-compliant external flash and hard drives. For the most up-to-date list of USB drives supported by the DG834GUv5

Router, go to:

http://kbserver.netgear.com/kb_web_files/n101300.asp

The USB port on the DG834GUv5 can only be used to connect

USB storage class devices like hard drives. USB modems, printers, CD ROM drives, and DVD drives cannot be connected to the device.

Note: The USB port on the DG834GUv5 can be used with one USB hard drive at a time. Do not attempt to use a USB hub attached to the USB port.

The DG834GUv5 supports FAT, FAT32, NTFS (read only) and Linux file systems. As soon as a USB hard disk or flash memory is attached to DG834GUv5 USB port, users on the local area network can access the USB drive with full read and write access.

Using the USB Drive Setup Wizard to Allow Remote Access from the Internet

You can use the USB Drive Wizard to quickly and easily share directories on the USB drive after you have attached it to the router.

1.Log in to the DG834GUv5 router at its default LAN address of http://10.0.0.2 with its default user name of admin and default password of admin, or using whatever LAN address and password you have set up

8-7

v1.0, May 2009