NETGEAR DG834GUV5 user manual V1.0, May

DG834GUv5 Wireless Router with Built-in DSL Modem User Manual

2.On the modem router main menu, select Add a WPS Client (computers that will connect wirelessly to the modem router are clients), and then click Next. The Add WPS Client screen displays:

Figure 2-6

3.Select the PIN Number radio button.

4.Go to the client wireless computer. Run a WPS configuration utility. Follow the utility’s instructions to generate a PIN. Take note of the client PIN.

5.From the modem router Add WPS Client screen, enter the client PIN number, and then click Next.

•The modem router tries to communicate with the client for 4 minutes.

•The modem router WPS screen displays a message confirming that the client was added to the wireless network. The modem router generates an SSID, and implements WPA/WPA2 wireless security.

6.Note the new SSID and WPA/WPA2 password for the wireless network. You can view these settings in the Wireless Settings screen. See “Using Push 'N' Connect (WPS) to Configure Your Wireless Network” on page 2-10

To access the Internet from any computer connected to your modem router, launch a browser such as Microsoft Internet Explorer or Mozilla Firefox. You should see the modem router’s Internet LED blink, indicating communication to the ISP.

Note: If no WPS-capable client devices are located during the 2-minute timeframe, the SSID will not be changed and no security will be implemented on the modem router.

Configuring Your Wireless Network and Security Settings 2-13

v1.0, May 2009