N150 Wireless ADSL2+ Modem Router DGN1000Bv3
8.Specify the internal ports by one of these methods:
•Leave the Use the same port range for Internal port check box selected.
•Fill in the Internal Starting Port.
Note: The Internal Ending Port field is masked out because the ending port number is calculated automatically by using the same range as the external port range.
9.Specify the internal IP address by one of these methods:
•In the Internal IP Address fields, type the internal IP address.
•Select the radio button for an attached device that is listed in the table.
10.Click the Apply button.
The custom service is added to the table on the Port Forwarding / Port Triggering screen.
To change a port forwarding entry in the table on the Port Forwarding / Port Triggering screen:
1.Select ADVANCED > Advanced Setup > Port Forwarding/Port Triggering. The Port Forwarding / Port Triggering screen displays.
2.Select the Port Forwarding radio button as the service type.
3.In the table, select the radio button next to the service that you want to change.
4.Click the Edit Service button.
The Ports - Custom Services screen displays.
5.Change the settings for the service.
6.Click the Apply button.
The changed settings of the service are shown in table on the Port Forwarding / Port Triggering screen.
To remove a port forwarding entry from the table on the Port Forwarding / Port Triggering screen:
1.Select ADVANCED > Advanced Setup > Port Forwarding/Port Triggering. The Port Forwarding / Port Triggering screen displays.
2.Select the Port Forwarding radio button as the service type.
3.In the table, select the radio button to the left of the service that you want to remove.
4.Click the Delete Service button.
The service is removed from the table on the Port Forwarding / Port Triggering screen.
Advanced Settings
113
