Administration
89
N150 Wireless ADSL2+ Modem Router DGN1000Bv3
To refresh the log screen:
Click the Refresh button.
To clear the log entries:
Click the Clear Log button.
To email the log immediately:
Click the Send Log button.
Note: To send and receive emails, make sure that you have set up and
enabled email notification (see Security Event Email Notifications on page 77).
Change Which Actions and Events Are Logged
To configure which actions are logged:
1. Select ADVANCED > Administration > Logs.
The Logs screen displays.
2. Select or clear any of the following check boxes:
•Attempted access to allowed sites. Log attempts to access websites that are
allowed.
•Attempted access to blocked sites and services. Log attempts to access websites
and services that are blocked.
•Connections to the Web-based interface of this Router. Log access to the modem
router web management interface.
•Router operation (startup, get time etc). Log modem router operation events such
as startup, Internet connection, firmware initialization, and time synchronization.
•Known DoS attacks and Port Scans. Log DoS attacks and port scans.
•Port Forwarding / Port Triggering. Log port forwarding and port triggering events.
•Wireless access. Log access by wireless clients.
•Automatic Internet connection reset. Log when the Internet connection is reset
automatically.
•Turn off wireless signal by schedule. Log when the radio is turned off if the wireless
signal is scheduled to be turned off.
By default, all of these check boxes are selected.
3. Click the Apply button.
Your settings are saved.