N150 Wireless ADSL2+ Modem Router DGN1000Bv3
•Use Static IP Address. Enter the IP address, IP subnet mask, and the gateway IP address that your ISP assigned. The gateway is the ISP’s modem router to which your modem router connects.
•Use IP Over ATM (IPoA). Enter the IP address, IP subnet mask, and the gateway IP address that your ISP assigned for your IPoA service. The gateway is the ISP’s modem router to which your modem router connects.
For the Domain Name Server (DNS) Address, Router MAC Address, and NAT (Network Address Translation) sections, see Internet Setup Screen Fields: Fields That Display Irrespective of Whether Login Is Required on page 30.
Internet Setup Screen Fields: Login Required
These fields display only when your ISP requires a login, that is, when you select the Yes radio button. The fields that display also depend on the selected encapsulation method and whether you select the
Encapsulation is PPPoE and Your ISP is T-Online
These fields display only when you select PPPoE from the Encapsulation menu and the
Figure 12. Internet Setup screen: fields that are specific to the T-Online selection
•Connection identifier. The connection identifier that
•
•
•Password. The password that you use to log in to
•Service Name (if Required). If
•Connection Mode. This field is masked out and not available.
•Idle Timeout (In Minutes). This field is masked out and not available.
NETGEAR genie Basic Settings
26