N150 Wireless ADSL2+ Modem Router DGN1000Bv3
The screen adjusts:
The modem router automatically detects the information in the following field:
•Router’s IPv6 Address on LAN1. This field shows the IPv6 address that is acquired for the modem router’s LAN interface. The number after the slash (/) is the length of the prefix, which is also indicated by the underline (_) under the IPv6 address. If no address is acquired, the field displays Not Available.
3.Configure the remote 6to4 relay router settings by selecting one of the following radio buttons:
•Auto. Your modem router uses any remote relay router that is available on the Internet. This is the default setting.
•Static IP Address. Enter the static IPv4 address of the remote relay router. Your IPv6 ISP usually provides this address.
4.Specify how the modem router assigns IPv6 addresses to the devices on your home network (the LAN) by selecting one of the following radio buttons:
•Use DHCP Server. This method passes more information to LAN devices, but some IPv6 systems might not support the DHCv6 client function.
•Auto Config. This is the default setting.
5.(Optional) Select the Use This Interface ID check box, and specify the interface ID that you want to be used for the IPv6 address of the modem router’s LAN interface.
If you do not specify an ID here, the modem router generates one automatically from its MAC address.
Advanced Settings
