NETGEAR DM602 manual Completing the Configuration, Modem Device Mode Basic Settings window

Reference Manual for the Model DM602 ADSL Modem

7.After selecting Modem Device type, the modem sends the modem’s built in Web Configuration Manager screen below (see Figure 4-6) to your browser.

Figure 4-6. Modem Device Mode Basic Settings window

8.ISP Parameters for Internet Access. Your ISP will indicate whether your Multiplexing Method is VC-BASED or LLC-BASED and which VPI and VCI is used. Enter the information in this screen. The most common Multiplexing Method is LLC-based. If your service provider does not indicate which one is used, use LLC-BASED.

Note: When the DM602 modem is set to operate in Modem Device Mode, your computer must be set with a static IP address in the range of 192.168.0.2-192.168.0.253 with a subnet mask of 255.255.255.0, and a gateway address of 192.168.0.1 in order to be able to access the built-in Web-based Configuration Manager.

9.Click on Apply.

Completing the Configuration

Your modem is now configured to provide Internet access for your computer. The following chapters describe how to configure the Advanced features of your modem, and how to troubleshoot problems that may occur.

4-6 Basic Configuration of the Modem