Reference Manual for the Model DM602 ADSL Modem
This screen shows the following parameters:
Table | Router Status Fields | |
|
|
|
Field |
| Description |
|
| |
Firmware Version | This field displays the modem firmware version. | |
|
|
|
LAN Port |
| These IP parameters apply to the Local Area Network (LAN) of the |
|
| modem. |
MAC Address | This field displays the Ethernet MAC address being used by the LAN | |
|
| port of the modem. |
IP Address |
| This field displays the IP address being used by the ADSL (WAN) port of |
|
| the modem. If no address is shown, the modem cannot connect to the |
|
| Internet. |
IP Subnet Mask | This field displays the IP Subnet Mask being used by the ADSL(WAN) | |
|
| port of the modem. |
Modem |
| These parameters apply to the ADSL modem section of the modem. |
|
| |
ADSL Firmware Version | This field displays the ADSL chipset firmware version. | |
|
| |
Modem Status | This field displays the state of the ADSL connection to your service | |
|
| provider, either “Connecting” or “Connected” |
|
| |
Connect Mode | This field displays the protocol used to connect to your service provider. | |
|
| When the ADSL link comes up, the connection will be either “Fast” or |
|
| “Interleaved”, depending on the way the telephone company has |
|
| configured its equipment |
|
|
|
Down Stream |
| This field displays the connection rate from the service provider to the |
|
| modem in bits per second |
|
|
|
Up Stream |
| This field displays the connection rate from the modem to the service |
|
| provider in bits per second |
|
|
|
VPI |
| This field displays the VPI entered in the Setup Wizard or Basic Settings |
|
| screen |
|
|
|
VCI |
| This field displays the VCI entered in the Setup Wizard or Basic Settings |
|
| screen |
|
|
|
Advanced Configuration of the Modem |
