Model EN104/EN108/EN116 Ethernet Hub Installation Guide

Verify that your package contains the following:

• Model EN104 hub, Model EN108 hub, or Model EN116 hub
• Mounting kit (for wall installation)
• BNC T-connector and BNC 50 Ω terminator (only if you have p urchased the Model EN108
hub or the Model EN116 hub)
• This installation guide
• Warranty & Owner Regist ration Card
• Support Information Card

• Power adapter and cord

Vista 10BASE-T Network Ports with Built-in LEDs

The front panel of the Model EN104 hub has four RJ-45 10BASE-T ports, the Model EN108 hub
has eight RJ-45 10BASE-T ports, and the Model EN116 hub has sixteen RJ-45 10BASE-T ports.
Two LEDs—the Link LED and the Rx LED—are built into each 10BASE-T port.
Product Illustration
8732FA
Front Panel of the Model EN104 hub
Front Panel of the Model EN108 hub
Front Panel of the Model EN116 hub
Pwr (Power) Normal/Uplink
push button
Col (Collision)
Pwr
Col
EN104
10 BASE-T HUBLINK Rx
1234 5678
Pwr
Col
EN108
10 BASE-T HUB LINK Rx
1234 5678
Pwr
Col
EN116
10 BASE-T HUB
1234 5678
LINK Rx
10BASE-T ports
8724EA
Link
LED Rx
LED