NETGEAR FR328S manual Firewall’s Front Panel, LED Descriptions

FR328S ProSafe Firewall with Dial Back-Up Reference Manual v2

The Firewall’s Front Panel

The front panel of the FR328S (Figure 2-1) contains status LEDs.

Figure 2-1: FR328S Front Panel

You can use some of the LEDs to verify connections. Table 2-1lists and describes each LED on the front panel of the firewall.

These LEDs are green when lit, except for the TEST LED, which is amber.

Table 2-1:	LED Descriptions
Label		Activity	Description
POWER		On	Power is supplied to the firewall.
TEST		On	The system is initializing.
		Off	The system is ready and running.
MODEM		On/Blinking	The port detected a link with the Internet WAN connection or
			Remote Access Server. Blinking indicates data transmission.
INTERNET
100		On/Blinking	The Internet port is operating at 100 Mbps.
LINK/ACT (Activity)		On/Blinking	The port detected a link with the Internet WAN connection and is
			operating at 10 Mbps. Blinking indicates data transmission.
LOCAL
100		On/Blinking	The Local port is operating at 100 Mbps.
LINK/ACT		On/Blinking	The Local port has detected a link with a LAN connection and is
(Link/Activity)			operating at 10 Mbps. Blinking indicates data transmission.

Introduction 2-5

M-10207-01, Reference Manual v2