FS728TP Smart Switch Software User Manual
Configuring the Device Using Your Browser 5-74
v2.0, November 2006
Defining VLAN PVID Settings
The Interface PVID Settings Page contains parameters for assigning Port VLAN ID (PVID) values
to interfaces. All ports must have a defined PVID. If no other value is configured the default
VLAN PVID is used. VLAN number 1 is the default VLAN and cannot be deleted from the
system. Once the PVID is changed from 1 to another VLAN ID on an interface, the default VLAN
on that interface is automatically removed.
To open the Interface PVID Settings Page:
1. Click Switch > VLAN > Interface PVID Settings. The Interface PVID Settings Page opens:
Figure 5-50
The Interface PVID Settings Page contains the following fields:
–Interface – Displays the interface to which the PVID tag is assigned. The possible field
values are:
–Port –Displays the port to which the PVID tag is attached.
–LAG – Displays the LAG to which the PVID tag is attached.
–PVID – Displays the PVID value. The possible field range is 1-4094.
2. Click . The PVID settings are defined, and the device is updated.