FS728TP Smart Switch Software User Manual
5-89 Configuring the Device Using Your Browser
v2.0, November 2006
–CoS – Classifies traffic based on the CoS (VPT) tag value.
–DSCP – Classifies traffic based on the DSCP tag value.
–None – Indicates that Trust is not enabled on the device.
–Interface – Displays the interface for which the global QoS parameters are defined.
–Port – Selects the port for which the global QoS parameters are defined.
–LAG – Selects the LAG for which the global QoS parameters are defined.
–Default CoS – Determines the default CoS value for incoming packets for which a VLAN
tag is not defined.
–Restore Defaults – Restores the factory CoS default settings to the selected port.
–Checked – Restores the factory CoS default settings to the ports.
–Unchecked– Maintains the current CoS settings.
2. Select Enable in the Quality of Service field.
3. Define the Trust Mode field.
4. Click . Quality of Service is enabled on the device.