FS728TP Smart Switch Software User Manual
3-5 Smartwizard Discovery Program
v2.0, November 2006
Main Screen > Switch Setting > Configuration SettingSelect a switch by clicking on it. Then click Configuration Setting. The following screen appears.
From this screen, you can modify:.
•IP Address – Displays the currently configured IP address.
•Subnet Mask – Displays the currently configured Subnet Mask.
•Gateway – Displays the currently configured Gateway.
•System Name – Provides a user-defined system name field. The System Name field is to help
you keep track of your switches. The field can contain any combination of letters and
numbers.
•Location – Provides a user-defined field is to help you keep track of where this switch is. It
can contain any combination of letters and numbers.
•Password – Displays the default password is ‘password’.
•DHCP – DHCP automatically obtains the IP information for the switch.
•Product Name – Displays the Product Name.
•Mac Address – Displays the device MAC address.
Main Screen > Device Setting > Configuration Setting > SetClick Set to enable the new settings. You must enter your password for these settings to be
accepted.
Figure 3-3