NETGEAR FS728TP manual SNMPv1, 2c Notification Recipient

FS728TP Smart Switch Software User Manual

–SNMPv3 Notification Recipient

SNMPv1, 2c Notification Recipient

The SNMP v1, v2c Recipient table contains the following fields:

–ID – Indicates the SNMP table entry number.

–Recipients IP – Displays the IP address to which the traps are sent.

–Notification Type – Displays the notification sent. The possible field values are:

–Trap – Indicates traps are sent.

–Inform – Indicates informs are sent.

–Community String – Displays the community string of the trap manager.

–Notification Version – Displays the trap type. The possible field values are:

–SNMP V1 – Indicates that SNMP Version 1 traps are sent.

–SNMP V2c – Indicates that SNMP Version 2 traps are sent.

–UDP Port – Displays the UDP port used to send notifications. The default is 162.

–Filter Name – Indicates if the SNMP filter for which the SNMP Notification filter is defined.

–Timeout – Indicates the amount of time (in seconds) the device waits before re-sending informs. The default is 15 seconds.

–Retries – Indicates the amount of times the device re-sends an inform request. The default is 3 seconds.

–Delete – Removes the currently selected recipient. The possible field values are:

–Checked – Removes the selected recipient from the list of recipients.

–Unchecked – Maintains the list of recipients.

SNMPv3 Notification Recipient

The SNMPv3 Notification Recipient table contains the following fields:

–ID – Indicates the SNMP table entry number.

–Recipient IP – Displays the IP address to which the traps are sent.

–Notification Type – Displays the type of notification sent. The possible field values are:

– Trap – Indicates that traps are sent.

Configuring the Device Using Your Browser 5-112

v2.0, November 2006