FS728TP Smart Switch Software User Manual
5-145 Configuring the Device Using Your Browser
v2.0, November 2006
–Received Bytes (Octets) – Displays the number of octets received on the interface since
the device was last refreshed. This number includes bad packets and FCS octets, but
excludes framing bits.
–Received Packets – Displays the number of packets received on the interface since the
device was last refreshed, including bad packets, Multicast packets, and Broadcast
packets.
–Broadcast Packets – Displays the number of good Broadcast packets received on the
interface since the device was last refreshed. This number does not include Multicast
packets.
–Multicast Packets – Displays the number of good Multicast packets received on the
interface since the device was last refreshed.
–CRC Align Errors – Displays the number of CRC and Align errors that have occurred on
the interface since the device was last refreshed.
–Undersize Packets – Displays the number of undersized packets (less than 64 octets)
received on the interface since the device was last refreshed.
–Oversize Packets – Displays the number of oversized packets (over 1518 octets) received
on the interface since the device was last refreshed.
–Fragments – Displays the number of fragments (packets with less than 64 octets,
excluding framing bits, but including FCS octets) received on the interface since the
device was last refreshed.
–Jabbers – Displays the total number of received packets that were longer than 1518
octets. This number excludes frame bits, but includes FCS octets that had either a bad
Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS
with a non-integral octet (Alignment Error) number. The field range to detect jabbers is
between 20 ms and 150 ms.
–Collisions – Displays the number of collisions received on the interface since the device
was last refreshed.
–Utilization – Displays the percentage of the interface utilized.
2. Select an entry in the History Entry No. field. The statistics are displayed.