FS728TP Smart Switch Software User Manual
5-63 Configuring the Device Using Your Browser
v2.0, November 2006
–Admin Speed – Displays the configured rate for the port. The port type determines what
speed setting options are available. Port speeds can only be configured when auto
negotiation is disabled. The possible field values are:
–10M – Indicates the port is currently operating at 10 Mbps.
–100M – Indicates the port is currently operating at 100 Mbps.
–1000M – Indicates the port is currently operating at 1000 Mbps.
– Current LAG Speed – Indicates the current configured rate for the LAG.
–Admin Duplex – Displays the port duplex mode. This field is configurable only when
auto negotiation is disabled, and the port speed is set to 10M or 100M. This field cannot be
configured on LAGs. The possible field values are:
–Full – The interface supports transmission between the device and its link partner in
both directions simultaneously.
–Half – The interface supports transmission between the device and the client in only
one direction at a time.
–Current Admin Duplex– Displays the current admin duplex mode
–Current Auto Negotiation – Displays the current Auto Negotiation setting. Auto
negation of Flow Control (FC) is enabled by default.
–Admin Advertisement – Defines the auto-negotiation setting the port advertises. The
possible field values are:
–Max Capability – Indicates that all port speeds and Duplex mode settings are
accepted.
–10 Half – Indicates that the port advertises for a 10 mbps speed port and half duplex
mode setting.
–10 Full – Indicates that the port advertises for a 10 mbps speed port and full duplex
mode setting.
–100 Half – Indicates that the port advertises for a 100 mbps speed port and half duplex
mode setting.
–100 Full – Indicates that the port advertises for a 100 mbps speed port and full duplex
mode setting.
–1000 Full – Indicates that the port advertises for a 1000 mbps speed port and full
duplex mode setting.