Chapter 2

Physical Description

This chapter describes the NETGEAR GS110TP Smart PoE Switch hardware features. Topics include:

GS110TP Front and Back Panel Configuration

LED Designations

Device Hardware Interfaces

GS110TP Front and Back Panel Configuration

The GS110TP Smart PoE Switch has eight 10/100/1000 Mbps autosensing and two 1000 Mbps SFP Gigabit Ethernet switching ports. Each RJ-45 port is capable of sensing the line speed and negotiating the duplex mode with the link partner automatically.

Figure 2-1illustrates the front panel of the NETGEAR GS110TP Smart PoE Switch:

Link/Speed/ACT LEDs (left) PoE Status LEDs (right)

Power/Status LED

PoE Max LED

10/100/1000 Mbps Ethernet Ports

1000M SFP Ports

Figure 2-1

The front panel contains the following:

Eight RJ-45 connectors for 10/100/1000 Mbps autosensing Gigabit Ethernet switching ports

Two 1000M SFP Gigabit Ethernet switching ports

Reset button to restart the device

Recessed default reset button to restore the device back to the factory defaults

Link, Speed, and Activity LEDs for each port

2-1

v1.0, March 2010

Page 11
Image 11
NETGEAR GS110TP-100NAS manual Chapter Physical Description, GS110TP Front and Back Panel Configuration