Reference Manual for the MR814 v3 Cable/DSL Wireless Router
Connecting the Router to the Internet 3-3
202-10039-01
Note: Place the MR814 v3 router in a location which conforms to the “Observe
Performance, Placement, and Range Guidelines” on page 4-1. The stand provided with the
router provides a convenient, space-saving way of installing the router. Avoid stacking it
on other electronic equipment.
f. Securely insert the blue cable that came with your router (cable 2 in the diagram below)
into a LAN port on the router such as LAN port 4 (point C in the diagram), and the other
end into the Ethernet port of your computer (point D in the diagram).
Figure 3-3: Connect the computer to the router
Your network cables are connected and you are ready to restart your network.

2. RESTART YOUR NETWORK IN THE CORRECT SEQUENCE

Warnin g: Failure to restart your network in the correct sequence could prevent you from
connecting to the Internet.
a. First, turn on the broadband modem and wait 2 minutes.
b. Now, plug in the power cord to your router and wait 1 minute.
c. Last, turn on your computer.
Note: For DSL customers, if software logs you in to the Internet, do not run that software. You
may need to go to the Internet Explorer Tools menu, Internet Options, Connections tab page
where you can select “Never dial a connection.”
/$13RUWV

%OXH1(7*($5
&DEOH
,QWHUQHW
PRGHP
URXWHU
FRPSXWHU C
D