NETGEAR MR814 v3 manual Chapter Introduction, Key Features of the Router

Chapter 2

Introduction

This chapter describes the features of the NETGEAR MR814 v3 Cable/DSL Wireless Router.

Key Features of the Router

The MR814 v3 Cable/DSL Wireless Router with 4-port switch connects your local area network (LAN) to the Internet through an external access device such as a cable modem or DSL modem.

The MR814 v3 router provides you with multiple Web content filtering options, plus browsing activity reporting and instant alerts -- both via e-mail. Parents and network administrators can establish restricted access policies based on time-of-day, Web site addresses and address keywords, and share high-speed cable/DSL Internet access for up to 253 personal computers. In addition to the Network Address Translation (NAT) feature, the built-in firewall protects you from hackers.

With minimum setup, you can install and use the router within minutes.

The MR814 v3 router provides the following features:

•802.11b Standards-based wireless networking

•WPA-PSK wireless security.

•Easy, web-based Smart Wizard configuration assistant

•Content Filtering and Site Blocking Security

•Built in 4-port 10/100 Mbps Switch

•Ethernet connection to a wide area network (WAN) device, such as a cable modem or DSL modem

•Extensive Protocol Support

•Login capability

•Front panel LEDs for easy monitoring of status and activity

•Flash memory for firmware upgrade

Introduction 2-1

202-10039-01