NETGEAR MR814 v3 manual Dhcp Configuration of TCP/IP in Windows

Reference Manual for the MR814 v3 Cable/DSL Wireless Router

•Verify that the Obtain an IP address automatically radio button is selected.

•Verify that Obtain DNS server address automatically radio button is selected.

•Click the OK button.

This completes the DHCP configuration of TCP/

IP in Windows XP.

Repeat these steps for each PC with this version of Windows on your network.

DHCP Configuration of TCP/IP in Windows 2000

Once again, after you have installed the network card, TCP/IP for Windows 2000 is configured. TCP/IP should be added by default and set to DHCP without your having to configure it. However, if there are problems, follow these steps to configure TCP/IP with DHCP for Windows 2000.

C-12 Preparing Your Network

202-10039-01