NETGEAR MR814 v3 manual How to Restrict Wireless Access by MAC Address, WPA Settings menu

Reference Manual for the MR814 v3 Cable/DSL Wireless Router

Figure 4-6: WPA Settings menu

2.Enter a word or group of 8-63 printable characters in the Password Phrase box.

3.Click Apply to save your settings.

How to Restrict Wireless Access by MAC Address

To restrict access based on MAC Addresses, follow these steps:

1.Log in to the MR814 v3 firewall at http://www.routerlogin.net with its default user name of admin and default password of password, or using whatever LAN address and password you have set up.

Note: When configuring the firewall from a wireless computer whose MAC address is not in the Trusted PC list, if you select Turn Access Control On, you will lose your wireless connection when you click on Apply. You must then access the router from a wired computer or from a wireless computer which is on the access control list to make any further changes.

2.Click Wireless Settings in the Advanced section of the main menu of the MR814 v3.

3.Click Setup Access List to display the Wireless Station Access List menu.

4-12 Wireless Configuration

202-10039-01