NETGEAR MR814 v3 manual How to Configure WEP, Wireless Settings encryption menu

Reference Manual for the MR814 v3 Cable/DSL Wireless Router

How to Configure WEP

To configure WEP data encryption, follow these steps:

Note: If you use a wireless computer configure WEP settings, you will be disconnected when you click on Apply. You must then either configure your wireless adapter to match the router WEP settings or access the router from a wired computer to make any further changes.

1.Log in to the MR814 v3 firewall at http://www.routerlogin.net with its default user name of admin and default password of password, or using whatever LAN address and password you have set up.

2.Click Wireless Settings in the main menu of the MR814 v3 firewall.

3.From the Security Options menu, select WEP. The WEP options display.

Figure 4-5. Wireless Settings encryption menu

4-10 Wireless Configuration

202-10039-01